Xerox DocuColor 12/DCCS50 Service Manual page 442

Figure 3 Open the Upper Frame Assembly
8. Raise the stoppers on both sides (Figure
1. Loosen the screws (2).
2. Raise the stoppers (2).
Repairs and Adjustments
REP 8.3.1
4).
NOTE: Before removing the Heat Roll, observe the location of the flange on each
bearing. They should be inside the Fuser Frame at each end (Figure 6).
9. Remove the Heat Roll (Figure
1. Remove the Heat Roll.
1/05
4-118
manuals4you.com manuals4you.com
Figure 4 Raise the Stoppers
5).
DocuColor 12/DCCS50
Reissue