11-916 Bin 6 Full Stack RAP
The Control Logic detected that Bin 6 is full.
NOTE: If this machine has a Finisher/Sorter Accessory, go to Section 8D,
Stack RAP
to troubleshoot this Fault Code.
Initial Actions
•
Refer to BSD11.6 for the following procedure.
•
Ensure that Bin 6 is empty
Procedure
Enter dC330 011-286 Bin 6 Full Sensor. Press Start. Manually move the actuator in and out
of the sensor The display Changes from H to L to H as the actuator is moved in and out
of the sensor.
Y
N
Replace the Mail Box Control PWB
Check the Bin 6 Full Sensor for intermittent operation. If the problem continues, replace the
Mail Box Control PWB
(PL
13.10).
Status Indicator RAPs
11-916 Bin 6 Full Stack RAP, 11-917 Bin 7 Full Stack
11-916 Bin 6 Full
(PL
13.10).
11-917 Bin 7 Full Stack RAP
The Control Logic detected that Bin 7 is full.
NOTE: If this machine has a Finisher/Sorter Accessory, go to Section 8D,
Stack RAP
to troubleshoot this Fault Code.
Initial Actions
•
Refer to BSD11.6 for the following procedure.
•
Ensure that Bin 7 is empty
Procedure
Enter dC330 011-287 Bin 7 Full Sensor. Press Start. Manually move the actuator in and out
of the sensor The display Changes from H to L to H as the actuator is moved in and out
of the sensor.
Y
N
Replace the Mail Box Control PWB
Check the Bin 7 Full Sensor for intermittent operation. If the problem continues, replace the
Mail Box Control PWB
(PL
13.10).
1/05
2-210
manuals4you.com
manuals4you.com
11-917 Bin 7 Full
(PL
13.10).
DocuColor 12/DCCS50
Reissue