Rep 4.2 Main Drive Pwb (35-55 Ppm) - Xerox WorkCentre 5790 Series Service Manual

REP 4.2 Main Drive PWB (35-55 ppm)

Parts List on PL 4.15
Removal
Switch off the electricity to the machine,
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the rear cover, PL 8.10 Item
2. Remove the flywheel (3 short screws),
2
Remove the flywheel.
Figure 1 Remove the flywheel
Repairs/Adjustments
REP 4.2
WARNING
GP 14. Disconnect the power cord from the
WARNING
1.
Figure 1.
1
Remove 3 short screws.
3. Remove the main drive PWB,
3
Remove main drive motor
PWB
Replacement
Replacement is the reverse of the removal procedure.
May 2013
4-40
Figure 2.
1
Disconnect 7 PJs
2
marked B.
Remove 6 black
screws marked A.
Figure 2 Main drive PWB
Xerox® WorkCentre® 5790 Family