REP 8.1.1 AIOC PWB (SCC)
Parts List on PL 8.1
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
Static electricity may damage electrical parts. Always wear an anti-static wrist band during ser-
vice. If a wrist band is not available, touch a metallic section to discharge the static electricity.
1.
Remove the Rear Cover (REP 9.2.1).
2.
Disconnect the AIOC PWB connectors (9) (Figure 1).
Initial Issue
WorkCentre 5020
WARNING
CAUTION
Figure 1
3.
Remove the Core Clip (Figure 2).
1 Remove the Core Clip.
Figure 2 Removing the Core Clip
July, 2007
4-47
Repairs and Adjustments
REP 8.1.1