Rep 1.11 Ac Drive Pwb - Xerox DocuColor 2240 Service Manual

REP 1.11 AC Drive PWB

Parts List on PL 9.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove the Rear Cover (REP 14.2).
2. Remove the 24 VDC LVPS Chassis
3. Remove BTR1 HVPS (REP 1.10).
4. Remove the AC Drive PWB (Figure
a. Remove Screws (2) and Bracket.
b. Carefully observe position of wiring harnesses and AC wires for later reinstallation
c. Disconnect AC harness connectors (3), DC connectors (2). and AC Wires (6).
d. Release harness from Harness Clip.
e. Remove Mounting Screws (3). Disengage rear clip (not shown) and remove AC
Drive PWB.
Harness
Clip
P46
AC con-
nectors (3)
and AC
wires (6)
P43
White
Mounting
Screw
Figure 1 Removing AC Drive PWB
Initial issue
DC 3535/2240/1632
WARNING
(REP 1.9).
1).
Mounting
Screw
Screws (2)
P42
and
Blue
Bracket
Replacement
Ensure that White connector is P43 and the Blue connector is P42. Other connectors are dif-
ferent sizes to ensure correct connection.
DC Harness
connectors
Mounting
Screw
02/03
4-9
CAUTION
Repairs and Adjustments
REP 1.11