31. Install the Inner Simplex Guide.
32. Install all covers and doors.
33. Install the Output Tray, Scanner, and DADF on the 8860MFP.
34. Perform the Wiper Alignment Adjustment
35. Perform the Printhead Parking procedure
36. Perform the Head Tilt Gear Homing procedure
37. Perform the Process Drive Homing Procedure
38. Turn system power On and print a Configuration page to test operation.
Repairs and Adjustments
REP 2.0.3, REP 2.0.4
(ADJ
2.5.1).
(ADJ
2.2.1).
(ADJ
4.13.1).
(ADJ
4.7.1).
REP 2.0.4 Y-Axis Belt
Parts List on
PL 2.0
Removal
1.
Remove the Left Side Cover
2.
Release tension on the Y-Axis Belt by pushing the end of the Spring Arm toward the front
of the printer.
Figure 1 Removing the Y-Axis Belt
3.
Hold tension with one hand while removing the Y-Axis Belt with the other.
09/2007
4-26
(REP 1.0.7
or
REP 1.1.9
for the 8860).
Phaser 8860/8860MFP Service Manual
Initial Issue