Rep 12.17-110 Ejector Belt - Xerox ColorQube 9303 Series Service Manual

REP 12.17-110 Ejector Belt

Parts List on PL 12.50.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the ejector assembly, refer to
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
WARNING
REP 12.10-110.
2. Figure 1, remove the ejector belt.
2
Remove the E-clip.
Replacement
The replacement is the reverse of the removal procedure. Ensure that the ejector belt is cor-
rectly engaged with the belt grip on the ejector assembly before the clip is reinstalled. Refer to
Figure 1.
February 2013
4-121
1
Remove the clip.
Belt grip.
3
Remove the pulley
then the ejector belt.
Figure 1 Remove the ejector belt
Repairs/Adjustments
REP 12.17-110