Inspecting With The Edge Width Inspection Item; Edge Width Inspection Item; Setup Procedure For Edge Width Inspection Item - Omron FQ2-S4 User Manual

4-12 Inspecting with the Edge Width Inspection Item

Edge Width Inspection Item

This inspection item is used to measure dimensions. Places where the color changes greatly are called edges.
The distance between two edges is called the edge width.
Measurement region
Color of edge to be found

Setup Procedure for Edge Width Inspection Item

Step 1 Selecting the Inspection Item
− [Inspection]
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Edge Width].
Registering inspection items: p. 94
Note
Drag the arrow at the bottom of the menu upward to display all of the inspection items.
FQ2-S4 User's Manual
Sample Settings Sample Measurement
Edges are searched from
two directions and the
distance is calculated.
OK NG

Inspecting with the Edge Width Inspection Item

169