Command List - Omron FQ2-S4 User Manual

Command List

The following table lists the no-protocol commands.
Commands that can be used in no-protocol Ethernet communications are listed below.
Type of command Command
Measurement control MEASURE
and measurement acqui-
MEASURE /C
sition commands
MEASURE /E
Utility commands CLRMEAS
CLRERR
DATASAVE
MODEL
RESET
TEACH
Scene control com- SCENE
mands
SCENE Scene_number
Data acquisition/setting POSITIONDATA
commands Item_number
External_reference_data_nu
mber
POSITIONDATA
Item_number
External_reference_data_nu
mber Setting
ITEMDATA
Inspection_item_number
External_reference_data_nu
mber
ITEMDATA
Inspection_item_number
External_reference_data_nu
mber Set_value
ITEMDATA2
Inspection_item_number
External_reference_data_nu
mber
ITEMDATA2
Inspection_item_number
External_reference_data_nu
mber
Text_strings
VERGET/S
VERGET/H
ERRGET
FQ2-S4 User's Manual Controlling Operation and Outputting Data with TCP No-protocol Communications
Abbreviation Function
M Executes one measurement. p. 412
M /C Starts continuous measure-
ments.
M /E Ends continuous measure-
ments.
None Clears the measurement val-
ues.
None Clears the error output status
(error signal and error indica-
tor).
None Saves the settings data to the
Sensor.
None Re-registers the models for
registered Search inspection
items.
None Restarts the Sensor.
None Executes teaching for all
applicable inspection items.
S Acquires the current scene
number.
S Scene_number Changes the scene number
being used.
PD Acquires data from a position
Item_number compensation item or filter
External_reference_data_nu item.
mber
PD Sets data for a position com-
Item_number pensation item or filter item.
External_reference_data_nu
mber Setting
ID Inspection_item_number Acquires the inspection item
External_reference_data_nu data.
mber
ID Inspection_item_number Sets the inspection item data. p. 423
External_reference_data_nu
mber Set_value
ID2 Inspection_item_number Acquires the text string data
External_reference_data_nu of the specified inspection
mber item.
ID2 Inspection_item_number Sets the text string data of the
External_reference_data_nu specified inspection item.
mber
Text_strings
None Acquires the version informa-
tion of the Sensor software.
None Acquires the Sensor model
information.
None Acquires the latest error code
of the Sensor.
Reference
p. 413
p. 414
p. 415
p. 416
p. 416
p. 417
p. 417
p. 418
p. 418
p. 419
p. 420
p. 420
p. 422
p. 424
p. 425
p. 426
p. 427
p. 428
411