Omron FQ2-S4 User Manual page 32

FQ2-S4@-@@@ (Sensors with C-mounts)
(5)
(4)
(1)
(7)
(5)
No. Name
(1) C-mount lens mounting surface The C-mount lens and macro ring are attached here. Determine the appro-
(2) I/O Cable connector
(3) Ethernet Cable connector
(4) Operation
indicators
(5) Mounting holes
(6) Mounting base (enclosed)
(7) C-mount cover
(8) Connector cover
30
Part Names and Functions
(5)
Bottom
Description
priate CCTV lens (C-mount lens) to use based on the field of view required
for the size of the measurement object.
Optical Diagrams: p. 35
An FQ-WD or FQ-WU I/O Cable is used to connect the Sensor to the power
supply, external I/O, and Data Unit.
An FQ-WN Ethernet Cable is used to connect the Sensor to external
devices such as the Touch Finder or computers.
OR Lights orange when the overall judgement output (OR) signal turns ON.
ETN Lights orange during Ethernet communications.
ERROR
Lights red when an error occurs.
11-1 Error Histories p. 452
BUSY Lights green when the Sensor is executing a process.
* You can change the BUSY indicator to a RUN indicator.
This indicator is set by default to a BUSY indicator, but if you change it to a
RUN indicator, it will light green during operation.
Changing the Sensor's BUSY Indicator: p. 278
These mounting holes for M3 screws are used to mount the Camera and to
mount to the base. There are mounting holes on the top, bottom, left, and
right surfaces.
Dimensions: p. 555
The mounting base has 1/4-20UNC threads and is used to mount the Sen-
sor. The base can be attached to the bottom, top, left, or right side of the
Sensor.
* We recommend mounting the Sensor with the mounting screw holes. The
mounting base does not necessarily need to be used.
This cover is attached to the C-mount lens fitting when a lens is not
attached.
This cover is attached to the connection when an Ethernet Cable is not con-
nected.
(8)
(5)
Sensor Mounted to Base
(3)
(2)
(6)
FQ2-S4 User's Manual