Omron FQ2-S4 User Manual page 415

Start Continuous Measurements
This command starts continuous measurements.
If data output is not set, only continuous measurement is performed.
If data output is set, continuous measurement is performed and the results corresponding to the number of
measurements made are returned as response data.
<Command Format>
M E A S U
<Response Format>
When the Command Is Processed Normally
O K CR
Measure-
CR
ment result
Measure-
Data returned for the number of
CR
ment result
continuous measurements made.
Measure-
CR
ment result
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Measurement result
FQ2-S4 User's Manual Controlling Operation and Outputting Data with TCP No-protocol Communications
R E / C CR
Delimiter
The measurement results corresponding to the number of measurements made are out-
put when data output is set.
The measurement result is not output when data output is not set.
Setting the Data To Output Automatically after Measurements: p. 403
or
M / C
Delimiter
CR
413