Omron FQ2-S4 User Manual page 229

The following displays are convenient if more than one Sensor is connected.
Multi sensor
Displays the measurement results of
all connected Sensors.
Green display: OK, Red display: NG
(Run Mode) − [Sensor monitor]
Specifying the Startup Run Mode Display
The display that appears when power supply is turned ON can be set.
The default setting is [Graphics].
(Setup Mode or Run Mode) − [TF settings] − [Startup display] − [Display pattern]
Note
You can set the scene to be displayed when the power supply is turned ON.
Setting the Startup Scene: p. 236
Displaying the Inspection Item Results
You can scroll though the measurement results of all the configured inspection items by using the following
operations.
Switches to the previous inspection item.
Switches to the next
inspection item.
Note
The following are also displayed in addition to the measurement results for each inspection item.
• Filter item: The results of a filter item is displayed.
• Camera input: The image that is being measured is displayed.
• Position comp.: The result of position compensation is displayed.
• All Region: The measurement regions for all inspection items are displayed.
• Calculation: Displays the results for each expression registered to an inspection item.
FQ2-S4 User's Manual
NG sensor
Automatically changes to the display for
any Sensor with an NG result.
Configuring the Run Mode Display
227