Changing The Area Detection Conditions; Increasing Processing Speed For Area - Omron FQ2-S4 User Manual

Changing the Area Detection Conditions

You can fill in the area detected through color extraction or binary conversion to perform a stable extraction of
the areas and their characteristics or to mark only areas inside the measurement region for inspection.
− [Inspection] −
[Inspect]
1
Press [Fill profile] and select [Filling up holes] or [Fill
Outline].
Item Parameter
Meas.Parame- Fill profile
ter (measure-
ment
parameter)

Increasing Processing Speed for Area

Make the measurement region smaller to reduce the processing time.
Changing the measurement region: p. 144
186
Inspecting with the Area Inspection Item
− −
[Aria] [Modify] [Details] Tab Page
Setting Description
Filling up holes None: Holes are not filled.
Fill Outline Filling up holes: Processes areas that are surrounded by the specified
None color, like in the shape of a donut, as the specified color.
Default: None
Input Image
Fill Outline:
Measures the image between the first extracted point and the last
extracted point in the X axis direction in the measurement area as the
extracted color.
Because filling is performed only in the X axis direction, this method is
faster than filling up holes.
Input Image
−
[Meas. Parameter]
Filled Image
Image Following Fill Outline
FQ2-S4 User's Manual