Saving Sensor Settings; Backing Up Settings In External Memory - Omron FQ2-S4 User Manual

7-7 Saving Sensor Settings

The Sensor settings are saved in flash memory inside the Sensor.
This section describes how to back up the settings in and restore them from an SD card or other external
memory.

Backing Up Settings in External Memory

(Setup Mode) − [Save to file] − [Setting] Tab Page
1
Press the data to save.
2
Enter the file name in 15 characters or less.
After entering the file name, press [OK]. The data will be
saved and the display will return to [Save to file].
Applicable Data
Data
Scene data (The file name
extension is SCN.)
Scene group data (The file
name extension is SGP.)
Dictionary data (The file name
extension is DIC.)
All dictionary data (The file
name extension is DGP.)
Sensor system data (The file
name extension is SYD.)
All Sensor data (The file
name extension is BKD.)
Touch Finder data (The file
name extension is MSD.)
Calibration data (file name
extension: CLB)
Calibration group data (file
name extension: CGP)
*1 For the PC Tool, data will be saved in the following folder: \\..\My Documents\OMRON FQ
262

Saving Sensor Settings

*1
Storage location Description
\sensor_name\SCN The following data is backed up for each scene.
• Settings for all inspection items
• Order of inspection items
\sensor_name\SGP All scene data is backed up.
\sensor_name\DIC Dictionary data is backed up.
\sensor_name\DGP All dictionary data is backed up.
\sensor_name\SYD All system data in the Sensor is backed up.
The system data is the same for all scenes.
\sensor_name\BKD All settings in the Sensor (all scene data, Sensor system data, and calibra-
tion group data) are backed up.
\MSD All settings in the Touch Finder are backed up.
--- The calibration settings for each scene are backed up.
--- The calibration settings for all scenes are backed up.
FQ2-S4 User's Manual