Logging Measurement Data And Image Data; Logging Procedure - Omron FQ2-S4 User Manual

7-6 Logging Measurement Data and Image Data

There are two ways to log data.
Recent results logging:
File logging:
The amounts and types of data that can be logged depend on the logging method that is used, as shown in the
following table.
Logged data
Statistical data
Measurement data
Image data
*1 For recent results logging, the oldest data is overwritten when the maximum number of saved data items is exceeded.
*2 This limit is for one data item.
If more than one data item is logged at the same time, logging can be performed as long as the total number of data items in all logged
data is 32,000 or less.

Logging Procedure

Use the following procedure to log data.
(common settings for recent results logging and file logging)
(common settings for recent results logging and file logging)
(Change to Run Mode.)
Execution of recent
results logging
• Saving Recent Results Logging Data
p. 260
• Deleting Logged Data
p. 260
252

Logging Measurement Data and Image Data

Data is temporarily saved in memory inside the Sensor.
Large amounts of data are saved in SD cards or other external media.
Logged quantity
Recent results logging
One value (The average value of the mea-
surement results in the collected measure-
ment data is continuously updated.)
1,000 measurement values max.
20 images max.
Logging settings
Output settings
Enabling file logging
(Change to Run Mode.)
Executing file logging.
Execution of file logging
*1
File logging
Not possible.
*2
Up to the capacity of the external memory
• Setting Logging Conditions
File logging: p. 253
Recent results logging: p. 258
• Selecting the Measurement Data To Log
p. 254
• Setting the File Name for Logged Data
p. 255
• Setting the Format for Saving Measurement Data
p. 256
• Enabling File Logging
p. 256
• Starting and Stopping Logging
p. 257
FQ2-S4 User's Manual