Table of Contents
Advertisement
Menu command
Rotation
Angle range
Model mode
Extraction con-
dition
Candidate
level
Extraction X
Extraction Y
Detection
count
Sorting method
Reflect
Rotation
Angle range
Sub-model num-
ber
Plain inspection Enables or disables inspecting plain
Sub-pixel
Candidate level
Reflect
Edge level
Noise level
Reflect
472
Menu Tables
Description
Sets the angle range for the registered
model.
You can change to a mode that makes
it easier to search for images similar to
a model.
Sets the detection target to only
objects with a correlation above the
specified candidate level.
Results are output only for objects with
a measured X coordinate that is within
this range.
Results are output only for objects with
a measured Y coordinate that is within
this range.
Sets the maximum number of detec-
tion results to output.
Sets the sort condition to use when
multiple measurement results meet
the extraction conditions..
You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
Sets the angle range for the registered
model.
You can change the number of divi-
sions of the registered model.
sections.
You can increase the accuracy of
measurement positioning.
Sets the detection target to only
objects with a correlation above the
specified candidate level.
You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
Sets the color density level of the
edge.
Sets the color density level to treat as
noise.
You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
Setting range
No (default), Yes
−180 to 180
Fast (default), Stable
0 to 100 (default: 60)
−999,999,999.9999 to
999,999,999.9999
−999,999,999.9999 to
999,999,999.9999
1 to 32
Corr. ascending order, Corr. descending
order (default), Pos.X ascending order,
Pos.X descending order, Pos.Y ascend-
ing order, Pos.Y descending order
No, Yes (default)
No (default), Yes
−180 to 180
3 × 3, 5 × 5 (default), or 9 × 9
Yes or No (default)
No (default), Yes
0 to 100 (default: 60)
No, Yes (default),
0 to 100 (default: 50)
0 to 442 (default: 5)
No, Yes (default),
Data
Refer-
ence
Scene
p. 151
Scene
p. 151
Scene
p. 151
Scene
p. 150
Scene
Scene
Scene
Scene
Scene
p. 149
Scene
p. 150
Scene
p. 158
Scene
p. 158
Scene
p. 152
Scene
p. 152
Scene
p. 157
Scene
p. 157
Scene
p. 157
Scene
p. 164,
p. 175,
p. 171
Scene
p. 165,
p. 175,
p. 171
Scene
p. 164,
p. 175,
p. 171
FQ2-S4 User's Manual
Advertisement
Table of Contents
Troubleshooting
