Selecting A Sensor For Configuration - Omron FQ2-S4 User Manual

3-1 Selecting a Sensor for Configuration

If multiple Sensors are connected to a single Touch Finder or computer, a list of the Sensors that are connected
is displayed by default. Use the following procedure to change to the Sensor to set up.
1
− [Switch Sensor].
Press
2
Press the image of the Sensor to be set up.
will be displayed for Sensors that are not yet set.
Note
Once the Touch Finder detects and records a Sensor, the display or-
der for showing more than one Sensor is fixed. Even if the system
configuration is changed to reduce the number of Sensors, the pre-
vious display location will remain for Sensors that were removed.
To update displays of multiple Sensors to the current connection sta-
tus, press [ ] - [Auto connect] on the right of the display in step 2, to
automatically reconnect.
3
Press
Mode.
4
Press [Yes].
Note
There are different methods that you can use to connect the Sensors. For example, you can automatically connect to
the Sensors that are recognized by the Touch Finder, or you can manually register the Sensors to connect.
7-5 Connecting to More Than One Sensor: p. 248
58

Selecting a Sensor for Configuration

− [Sensor settings] to return to Setup
FQ2-S4 User's Manual