Reflect In Total Judgement; Measurement Data That Can Be Used For External Outputs And Calculations - Omron FQ2-S4 User Manual

• Sensors with Color Cameras Only
Item Parameter
Judgement Color difference
Parameter
Color deviation
R average
G average
B average
• Sensors with Monochrome Cameras only
Item Parameter
Judgement Density average
Parameter
Density deviat.
(density deviation)

Reflect in Total Judgement

You can specify whether to reflect the judgement results of an inspection item in the overall judgement.
−
[Inspect] [Inspection]
1
Set [Reflect] to [None].

Measurement Data That Can Be Used for External Outputs and Calculations

The following values can be used as measurement data and output to external devices via the Ethernet or used
in calculations.
Expression text string
JG Judgement
AR R average
AG G average
AB B average
AD Color diff./dens. AV.
Color difference
DV Clr. deviat. Color devi-
ation
4-17 Calculations and Judgements Using Inspection Item Data: p. 197
180
Inspecting with Color Data Inspection Item
Setting Description
0 to 442 Sets the upper and lower limits of the difference between the average
color and reference color that is to be judged as OK.
0 to 221 Set the upper and lower limits of the range of the deviation in the region
that is to be judged as OK.
0.0000 to 255.0000 Set the difference in the average value of the R (red) component that is to
be judged as OK.
0.0000 to 255.0000 Set the difference in the average value of the G (green) component that is
to be judged as OK.
0.0000 to 255.0000 Set the difference in the average value of the B (blue) component that is
to be judged as OK.
Setting
0 to 255
0.0000 to 127.0000
− −
[Add item.] [Color Data]
Data name
This is the judgement result.
This is the average value of the R (red) compo-
nent.
This is the average value of the G (green) compo-
nent.
This is the average value of the B (blue) compo-
nent.
(For Sensors with Color Cameras) This is the dif-
ference between the average color in the region
and the standard color.
(For Sensors with Monochrome Cameras) This is
the difference between the average density in the
region and the standard density.
(For Sensors with Color Cameras) This is the devi-
ation within the region.
(For Sensors with Monochrome Cameras) This is
the deviation within the region.
Description
Set the judgement upper and lower limits for the average density in the
measurement region.
Set the upper and lower limits for the deviation in the average density in
the measurement region.
−
[Details] Tab Page
Description
−
[Output parameter]
Data range
−2: No judgement (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
0 to 255
0 to 255
0 to 255
0 to 442
0 to 255
0 to 221
0 to 217
FQ2-S4 User's Manual