Outputting Read Characters To An External Device - Omron FQ2-S4 User Manual

Important
• All of the parameters except for the [Fast mode] measurement parameter are set when you press the [Teach]
Button.
• When the "Code type" setting is changed, some settings are initialized as shown below.
Parameter
Code type
Auto length
Size
Reverse
Code color
Fast mode
Shape
QR Code Model
Error Correction Level
Cell

Outputting Read Characters to an External Device

After a measurement, you can automatically output the character string that was read with the DPM 2D code
inspection item to a PLC or other external device. The character strings are output after outputting the output
data (output data settings 0 to 31), such as the inspection item parameters and calculation result.
Refer to the description for the communications format for the setting procedure and output specifications to
output the character string.
Outputting Character Strings
• EtherNet/IP: p. 346
• PLC Link: p. 383
• TCP No-protocol Communications: p. 408
134
Reading DPM 2D Codes
Initialized due to "Code type" change
Initialized
Initialized
Initialized
Initialized
Initialized
Initialized
FQ2-S4 User's Manual