Changing The Scene To Change The Line Process; What Are Scenes - Omron FQ2-S4 User Manual

7-1 Changing the Scene to Change the Line Process

What Are Scenes?

With an FQ2 Vision Sensor, the inspection items that can be processed at the same time are registered as
scenes. A command input from an external device or a touch panel operation can be used to select a certain
scene.
If a scene is registered for each type of measurement object or inspection, the line process can be changed
simply by changing the scene when the measurement object or inspection changes.
Example:
Line Process Changes:
Scene 0
Inspection for
product A
• Maximum Number of Scenes
With the FQ2-S4-series Vision Sensors, you can create up to 32 scenes.
• Settings Included with Scenes
The following settings are changed when the scene is changed: Camera image ([Image] Tab Page) and
Inspection Items ([Inspect] Tab Page). The settings related to external I/O specifications that are included in
the output settings and the system settings for the overall Sensor are used for all of the scenes.
Refer to the following information for the data that is included in the scene data.
12-1 Menu Tables: p. 458
234

Changing the Scene to Change the Line Process

Cap color
(Inspection item 0: Color Data)
Label detection
(Inspection item 1: Search)
Text alignment
(Inspection item 2: Edge Position)
Scene 1
Inspection for
product B
These can be registered as
one scene.
Scene 2
Inspection for
product C
Scene 31
Inspection for
product Z
FQ2-S4 User's Manual