Omron FQ2-S4 User Manual page 442

Set Image Adjustment Data: 280F 00501010
This command sets parameters or measurement values from a position compensation item or filter item.
● Format
MRC SRC
(1 byte) (1 byte)
28 0F
● Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
● End Codes
End code (hex)
0000
FFFF
● Parameter Descriptions
Position compensation
item number
External reference num-
ber
Set value
440
Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
Vision Sensor command code
(4 bytes)
00501010
MRES SRES
(1 byte) (1 byte)
End code
Meaning
Command execution ended normally.
Command execution ended in an error.
Specifies the number of the position compensation item or filter item to set.
Specifies the external reference number.
12-2 External Reference Parameters: p. 491
Specifies the set value.
12-2 External Reference Parameters: p. 491
Position compensation item/filter
item number (4 bytes)
Position compensation item/filter
item number 0 to 7 (1 digit max.)
Vision Sensor command code
(4 bytes)
00501010
External reference Set value (4 bytes)
number (4 bytes)
External reference Setting
number
FQ2-S4 User's Manual