Measurement Data That Can Be Used For External Outputs And Calculations; Measurement Data That Can Be Logged For Area; Errors - Omron FQ2-S4 User Manual

Measurement Data That Can Be Used for External Outputs and Calculations

The following values can be used as measurement data and output to external devices via the Ethernet or used
in calculations.
Expression text string
JG Judgement
AR Area
X Gravity X
Y Gravity Y
SA Reference area
SX Ref. point X (reference
point X)
SY Ref. point Y (reference
point Y)
4-17 Calculations and Judgements Using Inspection Item Data: p. 197

Measurement Data That Can Be Logged for Area

The following values can be logged as measurement data.
Measured item Range of value
Judgement 0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
Area 0 to 99999.9999
−99999.9999 to 99999.9999
Gravity X
−99999.9999 to 99999.9999
Gravity Y
* When logging data is output, the data is output in the order of the above table.
7-6 Logging Measurement Data and Image Data: p. 252

Errors

Errors in Teaching
A teaching error message will appear if the reference area registered during teaching is 0. Perform the
following.
• If the color of the measurement object has changed from the specified color, set the color again and try
teaching again.
If the specified color is not found during teaching, the reference area will be registered as 0. If having no area is
OK, adjust the judgement parameters with this value as the reference.
FQ2-S4 User's Manual
Data name
This is the judgement result.
This is the area in the measurement region
with the specified color.
This is the X coordinate of the center of the
measurement area with the specified color.
This is the Y coordinate of the center of the
measurement area with the specified color.
This is the area with the specific color to be
measured when a range is set.
This is the X coordinate of the center of
gravity when a range is set.
This is the Y coordinate of the center of
gravity when a range is set.
Description
Description
This is the measurement judgement results.
This is the measured color area.
This is the detected center of gravity X coordinate.
This is the detected center of gravity Y coordinate.
Inspecting with the Area Inspection Item
Data range
−2: No judgement (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
0 to 999999999.9999
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
0 to 999999999
−99999.9999 to 99999.9999
−99999.9999 to 99999.9999
187