Increasing Image Input Speed - Omron FQ2-S4 User Manual

Increasing Image Input Speed

With the partial input function, it is possible to input only images that are in the region that is necessary for
measurements.
The image measurement region becomes smaller and therefore the image input time is shortened.
Consider the offset in the measurement object when you set the range.
The image in the input range will be displayed in the inspection item setting displays and measurement
displays.
[Image] − [Camera setup]
1
] − [Partial input] on the right side of the dis-
Press [
play.
2
Press [Y] and set the input range along the Y axis by
setting the Y coordinate of the partial input start
point and the Y coordinate of the partial input end
point.
3
Press [X] and set the input range along the X axis by
setting the X coordinate of the partial input start
point and the X coordinate of the partial input end
point.
4
Press [OK].
Parameter
X coordinate of the partial input start
point
X coordinate of the partial input end
point
Y coordinate of the partial input start
point
Y coordinate of the partial input end
point
FQ2-S4 User's Manual
Setting
Range: 0 to 1,267
Default: 0
Range: 15 to 1,279
Default: 1,279
• FQ2-S4@@@@@/FQ2-S4@@@@@-M
Range: 0 to 472, Default: 0
• FQ2-S4@@@@@-08@
Range: 0 to 820, Default: 0
• FQ2-S4@-@@@
Range: 0 to 1,016, Default: 0
• FQ2-S4@@@@@/FQ2-S4@@@@@-M
Range: 7 to 479, Default: 0
• FQ2-S4@@@@@-08@
Range: 7 to 827, Default: 0
• FQ2-S4@-@@@
Range: 7 to 1,023, Default: 0
Partial input Y start line
Partial input Y end line
Y coordinate of the Y coordinate of the
partial input start point partial input end point
Partial input X Partial input X
start line
X coordinate of the X coordinate of the
partial input start point partial input end point
Description
Specify the partial input range along the X
axis.
Specify the partial input range along the Y
axis.
Shortening the Measurement Takt Time
end line
217