Omron FQ2-S4 User Manual page 277

Parameter Settings
Brightness Brightness:
(shutter speed) 1 to 20 (default: 2)
step Shutter speed:
0.01 to 1.00 (default: 0.30)
Increment count 0 to 10 (default: 2)
Decrement 0 to 10 (default: 2)
count
Setting scene retry
• Set the retry mode to [Scene retry] in "Retry details".
(Setup Mode) − [Sensor settings] − [Retry details]
1
Press [Scene retry] for the retry mode.
2
Set the switch order.
3
Set the scenes that are switched through.
Parameter Settings
Switch Order Auto (default), Fixed
Retry scene 1st to 32nd
FQ2-S4 User's Manual
Sets the brightness or shutter speed step (msec).
Sets the brightness (shutter speed) increment count.
Sets the brightness (shutter speed) decrement count.
Sets the scene switching order.
Auto:
Switches through the scenes in the order of highest frequency of use.
Fixed:
Switches through the scenes in the order that the scenes were registered for
scene switching.
Register the scenes for scene switching.
Register the scenes to switch in order from Åg1st". If there are any scenes for scene
switching that are not registered, the remaining scenes are ignored.
Description
Description
Setting the Retry Function
275