Increasing Measurement Position Accuracy; Obtaining Multiple Results Simultaneously - Omron FQ2-S4 User Manual

Note
• You can change the output form for each measurement value to one of the following settings.
] − [Result type] on the right of the display.
[
Press
Absolute value (default): The measured coordinates are output.
Relative value: The difference from the reference position is output as coordinates.

Increasing Measurement Position Accuracy

You can increase the accuracy of measurement positioning.
You can calculate down to four decimal places.
[Inspect] − [Inspection] − [Search] − [Modify] − [Details] Tab Page − [Meas. Parameter]
1
Press [Sub-pixel] and select [Yes].

Obtaining Multiple Results Simultaneously

You can detect all items that satisfy the extraction conditions.
Judgement is performed for all detected results.
[Inspect] − [Inspection] − [Search] − [Modify] − [Details] Tab Page − [Meas. Parameter]
1
Press [Multi-point output] and select [Yes].
2
Press [Sorting method] and select the conditions by
which to sort the detected results.
You can output the results in the sort order that you se-
lected.
Note
You can specify the actual output conditions and count for output-
ting multiple results.
Selecting the results to output: p. 140
Selection item Setting
Sorting method Corr. ascending order (ascending order of correlation
value)
Corr. descending order (descending order of correlation
value)
Pos.X ascending order (ascending order of position X)
Pos.X descending order (descending order of position X)
Pos.Y ascending order (ascending order of position Y)
Pos.Y descending order (descending order of position Y)
FQ2-S4 User's Manual
Description
Sorts the results in order from the smallest correlation
to the largest.
Sorts the results in order from the largest correlation to
the smallest.
Sorts the results in order from the smallest measure-
ment X position to the largest.
Sorts the results in order from the largest measure-
ment X position to the smallest.
Sorts the results in order from the smallest measure-
ment Y position to the largest.
Sorts the results in order from the largest measure-
ment Y position to the smallest.
Inspecting with the Search Inspection Item
139