Code - Omron FQ2-S4 User Manual

External Category Data name
refer-
ence
number
500 Display Number of characters
setting display
501 Character display
*1 Use the ITEMDATA2 command to set and/or acquire a text string.
2D-code
External Category Data name
refer-
ence
number
0 Mea- Judgement
sure-
ment
result
5 Index No.
6 Num. of characters
*1
7 Characters
103 Output Reflect
parame-
ter
121 Verifica- Verified master data
tion con-
dition
122 Partial verif. on/off
123 Last compared digit
124 First compared digit
125 Output String output on/off
parame-
ter
126 Error string size (bytes) Settings/
*1
127 Error string
128 Partial output on/off
129 Output last digit
130 Output first digit
514
External Reference Parameters
Setting/Acqui- Data range
sition
Setting/Acqui- 0: OFF
sition 1: ON
Setting/Acqui- 0: OFF
sition 1: ON
Setting/Acqui- Data range
sition
−2: Not measured,
Acquisition
0: Judgement is OK,
only
1: Judgement is NG,
13: Teaching not performed
error,
14: Figure not registered
error,
15: Out of range error,
−16: Measurement timeout
error
−2: Verification OFF,
Acquisition
only or reading error
−1: Verification is NG,
0 to 31: Master data No.
Acquisition 0 to 1024
only
Acquisition 32 characters max.
only
Setting/Acqui- 0: Yes, 1: No
sition
−1: OFF
Settings/
Acquisition 0: Verify all master data
1: Verify master data 0
2: Verify master data 1
Settings/ 0: None
Acquisition 1: Enable
Settings/ 1 to 1024
Acquisition
Settings/ 1 to 1024
Acquisition
Settings/ 0: None
Acquisition 1: Enable
1 to 20
Acquisition
Settings/ 20 characters max.
Acquisition
Settings/ 0: None
Acquisition 1: Enable
Settings/ 1 to 1024
Acquisition
Settings/ 1 to 1024
Acquisition
Default Expres- Logged data/
sion text Judgement
string parameter
1 --- ---
1 --- ---
Default Expres- Logged data/
sion text Judgement
string parameter
−2
JG Logged data
−2
IN ---
0 N Logged data
0 --- ---
0 --- ---
0 --- ---
0 --- ---
1024 --- ---
1 --- ---
0 --- ---
2 --- ---
NG --- ---
0 --- ---
1024 --- ---
1 --- ---
FQ2-S4 User's Manual