Run Tab Page (From Setup Display); Tool - Omron FQ2-S4 User Manual

Menu command
Model region
Insp. region
Adjust judgement
Auto adjustment Automatically adjusts the judgement
Display setting
Method
Auto display (trend
monitor and histo-
gram only)
Display range (trend
monitor and histo-
gram only)
Number of data
(trend monitor only)
Number of data
(histogram only)
Erase display
Save data

Run Tab Page (from Setup Display)

Menu command
Switch to Run mode

Tool

Setup Mode
Menu command
Select scene
Select
Rename
Copy
Clear
480
Menu Tables
Description
Same as for the Search item settings.
Adjusts judgement parameters without
stopping measurements.
parameters by using actual workpieces
which are considered as good or faulty
products.
Specifies whether to display individual
inspection results.
Selects the expression to use to auto-
matically adjust the judgement parame-
ters.
Same as the trend monitor and histogram for [Run] Mode.
Saves scene data, Calibration data, and
system data.
Description
Switches to Run Mode.
Description
Switches to a registered scene.
Used to delete, copy, or change the
name of a scene.
Setting range
---
OK Teach, NG Teach
Depends on the measurement data item
for the inspection item.
Threshold (minimum), Threshold (aver-
age) (default), or Threshold (maximum)
---
Setting range
---
Setting range
---
---
15 alphanumeric characters
---
Data Refer-
ence
Scene
Scene
Scene p. 219
--- p. 228,
p. 229
p. 228
p. 229
--- p. 222
Data Refer-
ence
--- p. 224
Data Refer-
ence
--- p. 234
FQ2-S4 User's Manual