Changing The Label Extraction Conditions; Sorting Extracted Labels - Omron FQ2-S4 User Manual

Changing the Label Extraction Conditions

Set the label extraction conditions. You can select to extract only labels that satisfy all four of the following:
Number of labels, specified area, gravity X, and gravity Y conditions.
− [Inspection] −
[Inspect]
−
Parameter] [Extraction condition]
1
Press and set each of the parameters for the extrac-
tion conditions.
Item Parameter Setting
Extraction Number of Range: 1 to 100
condition labels Default: 100
Area Range: 0 to 999,999,999.9999
Defaults: Upper limit: 999,999,999.9999,
Lower limit: 0
Range: −99,999,999.9999 to
Gravity X
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: −999,999,999.9999
Range: −999,999,999.9999 to
Gravity Y
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: −999,999,999.9999

Sorting Extracted Labels

Set the sort condition and count for extracted labels. You can set the sort condition and the maximum number
of detections for detection results.
− [Inspection] −
[Inspect]
1
Press [Sorting method].
2
Select the sorting method.
Item Parameter Setting
Measure- Sorting method Area ascending order
ment Area descending order
parameter Pos. X ascending order (ascending order of
X coordinate) (default)
Pos. X descending order (descending order
of X coordinate)
Pos. Y ascending order (ascending order of
Y coordinate)
Pos. Y descending order (descending order
of Y coordinate)
FQ2-S4 User's Manual
− −
[Labeling] [Modify] [Settings] Details
− −
[Labeling] [Modify]
−
[Details] Tab Page
Description
Set the maximum number of labels to detect.
Specify the area range to judge as a label.
Specify the gravity X position to judge as a label.
Specify the gravity Y position to judge as a label.
−
[Details] Tab Page [Meas. Parameter]
Description
Set the condition to use for label number reassignment.
When sorting by X or Y coordinates, the upperleft corner
is the origin.
Inspecting with the Labeling Inspection Item
−
[Meas.
193