Omron FQ2-S4 User Manual page 443

Getting the Inspection Item Data: 280F 00401020
This command acquires the parameters and measurement values of the specified inspection item.
● Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00401020
● Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
● End Codes
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
● Parameter Descriptions
Inspection item number Specifies the number of the inspection item for which to acquire the data.
External reference num- Specifies the external reference number.
ber 12-2 External Reference Parameters: p. 491
Acquired value Returns the data for the specified inspection item.
12-2 External Reference Parameters: p. 491
FQ2-S4 User's Manual Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
Inspection item number (4 bytes) External reference
Inspection item number from 00
to 1F (2 digits max.)
SRES Vision Sensor command code
(1 byte) (4 bytes)
00401020
number (4 bytes)
External reference
number
Acquired value (4
bytes)
Acquired value
(1,000 times the
actual value)
441