Frame Start Trigger (Pulse Width Trigger) - Omron STC-MBS312U3V Product Specifications And User's Manual

When operating in this mode, the exposure synchronizes the trigger signal.
The exposure time can be controlled by the pulse width of Frame Start trigger.
When the polarity on the Line Inverter is positive (false), the exposure can be controlled at a period of High level
of input trigger signal.
When the polarity on the Line Inverter is negative (true), the exposure can be controlled at a period of Low level
of input trigger signal.
To operate the camera in this mode, the following settings have to be set.
・Exposure Mode: Trigger Width
・Trigger Selector: Frame Start
・Trigger Mode: On
(*) On Trigger Mode except Frame Start should be set Off.
Timing
トリガー入力(正極性)
トリガー入力(負極性)
露光
映像出力
Delay time on exposure start timing in the sensor Jitter (unit: μseconds
Video Output Format
8bits
10bits
10bits Packed
12bits
12bits Packed
STC-MBS312U3V / STC-MCS312U3V / STC-MBS500U3V / STC-MCS500U3V
Product Specifications and Use's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Trigger Input
(Positive)
I/O Delay (tIPDLH)
I/O遅延(tIPDLH)
Trigger Input
(Negative)
I/O遅延(tIPDHL)
I/O Delay (tIPDHL)
センサー内部の露光開始遅延
Exposure Start Duration
inside of sensor
Exposure
VideoOut
tPW
I/O遅延(tIPDHL)
I/O Delay (tIPDHL)
tPW
I/O Delay (tIPDLH)
I/O遅延(tIPDLH)
LineDebounceTime LineDebounceTime
TriggerDelay
STC-MBS312U3V
STC-MCS312U3V
0 to 11.4
TriggerDelay
Exposure Start Duration
センサー内部の露光開始遅延
inside of sensor
)
STC-MBS500U3V
STC-MCS500U3V
0 to 13.4
No.16S024-02
32/64