Ocr - Omron FQ2-S4 User Manual

External Category Data name
refer-
ence
number
410 Logging Data logging switch for
condi- unit
tions
411 Data logging switch for
judgement
412 Data logging switch for
number of characters
413 Data logging switch for
cell recognition rate
414 Data logging switch for
contrast
415 Data logging switch for
focus
501 Display Character display
setting
502 Cell recognition rate
display
503 Contrast display
504 Focus display
*1 To acquire the detected text string, use the ITEMDATA2 command.

OCR

External Category Data name
refer-
ence
number
0 Measurement Judgement
result
5 Index number
6 Number of charac-
ters
7 Read character
string
8 Similarity
9 Stability
103 Output parame- Reflect
ter
FQ2-S4 User's Manual
Set/acquired Data range
Setting/Acqui- 0: Data logging OFF
sition 1: Data logging ON
Setting/Acqui- 0: Data logging OFF
sition 1: Data logging ON
Setting/Acqui- 0: Data logging OFF
sition 1: Data logging ON
Setting/Acqui- 0: Data logging OFF
sition 1: Data logging ON
Setting/Acqui- 0: Data logging OFF
sition 1: Data logging ON
Setting/Acqui- 0: Data logging OFF
sition 1: Data logging ON
Setting/Acqui- 0: OFF 1: ON
sition
Setting/Acqui- 0: OFF 1: ON
sition
Setting/Acqui- 0: OFF 1: ON
sition
Setting/Acqui- 0: OFF 1: ON
sition
Setting/Acquisition Data range
−2: No judgement (not measured),
Acquisition only
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error,
−16: Measurement timeout error,
−17: Format not entered error
−2: Verification result is OFF or read
Acquisition only
was NG,
−1: Verification result is NG
0 to 31: Master data number
Acquisition only 0 to 128
Acquisition only 128 characters max.
Acquisition only 0 to 100
Acquisition only 0 to 100
Setting/Acquisition 0: Yes, 1: No
Default Text string Logged
assigned
to
Ethernet
output
setting
1 --- ---
1 --- ---
1 --- ---
1 --- ---
1 --- ---
1 --- ---
1 --- ---
1 --- ---
1 --- ---
1 --- ---
Default Expres-
sion text
string
−2
JG
−2
IN
0 N
0 --
0 SIM
0 STB
0 ---
External Reference Parameters
Logged
data/
Judge-
ment
parame-
ter
Logged
data
Logged
data
Logged
data
---
Logged
data
Logged
data
---
519