Reflect In Total Judgement; Detail Settings; Outputting Read Characters To An External Device - Omron FQ2-S4 User Manual

Reflect in Total Judgement

You can specify whether to reflect the verification result of a 2D code inspection item in the overall judgement.
(The default setting is [Yes].)
−
[Inspect] [Inspection]
[Reflect]

Detail Settings

With the default settings, all of the parameters are set automatically. If the automatic settings are incorrect for
any reason, e.g., the code was read incorrect, set the detailed parameters manually and then perform teaching.
−
[Inspect] [Inspection]
Press [Meas. Parameter]
Set the measurement parameters.
Be sure to always specify the code type. When you automatically register matrix data, the code type, code
color, data matrix shape, and reverse settings are set automatically.
Setup Item Setting Value
Code type Data Matrix (Default)
QR Code
MicroQR Code
PDF417
MicroPDF417
Reverse Normal (default value)
Reverse
Code color Black
White
Auto (default value)
Shape (Data Matrix) Square (default value)
Square or Rectangle
Timeout 1 to 9999 ms
(default value: 9999)

Outputting Read Characters to an External Device

After a measurement, you can automatically output the character string that was read with the 2D-code
inspection item to a PLC or other external device. The character strings are output after outputting the output
data (output data settings 0 to 31), such as the inspection item parameters and calculation result.
Refer to the description for the communications format for the setting procedure and output specifications to
output the character string.
Outputting Character Strings
• EtherNet/IP: p. 346
• PLC Link: p. 383
• TCP No-protocol Communications: p. 408
FQ2-S4 User's Manual
− −
[Add item.] [2D-code]
− −
[Add item.] [2D-code]
Description
Selects the type of 2D Code to be read.
Sets normal or reverse as the image orientation.
This parameter is valid only one of the following code types is selected.
Data Matrix, QR Code, or Micro QR Code
Specifies the code color.
This item is enabled only when the following barcode types are selected:
Data Matrix, QR Code, MicroQR Code
Specifies the code shape.
This item is enabled only when the following barcode types are selected:
Data Matrix
Sets the timeout time in read processing. A read error occurs if measure-
ment does not end after the preset timeout time is exceeded.
− −
[Details] Tab Page [Output parameter]
−
[Details] Tab Page
−
125
Reading 2D-codes