Inspecting With The Labeling Inspection Item; Labeling; Setup Procedure For Labeling Inspection Item - Omron FQ2-S4 User Manual

4-16 Inspecting with the Labeling Inspection Item

Labeling

One region of the color you want to measure is counted as a Label. You can sort these labels by position or
size, and assign numbers to them. You can then output the total number of labels, and size and position of a
desired label.
Sample Settings
Note
If a Sensor with Color Camera is connected, you can specify up to four colors to measure. If a Sensor with Mono-
chrome Camera is connected, the image is converted to a black and white binary image. Then, white pixels are
measured.

Setup Procedure for Labeling Inspection Item

Step 1 Selecting the Inspection Item
− [Inspection]
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Labeling].
Registering Inspection Items: p. 94
Note
Drag the arrow
188

Inspecting with the Labeling Inspection Item

Measurement region
Color information is extracted
from the measurement object.
at the bottom of the menu upward to display all of the inspection items.
Sample Measurement
Regions of the extracted color are detected as labels.
Total number of detected labels: 3
Label numbers when sorted by area
Label 0
Label 1
Label 2
FQ2-S4 User's Manual