Omron FQ2-S4 User Manual page 291

• One-shot output
The status of the output OR signal is turned OFF after a specified time has passed. (Setting range: 0 to 1,000 ms)
ON
TRIG signal
OFF
ON
BUSY signal
OFF
ON
OR signal
OFF
(OR output: ON for NG)
Delaying the Output Timing
When using one-shot output, the output timing of the OR signal can be delayed. (Setting range: 0 to 1,000 ms)
ON
TRIG signal
OFF
ON
BUSY signal
OFF
ON
OR signal
OFF
Overall judgement
(OR output: ON for NG)
Settings
[In/Out] − [I/O setting] − [I/O setting] − [Output]
1
Press [Output mode] and press [Level output] or
[One-shot output].
2
Press [Output delay] and set the one-shot output de-
lay.
3
Press [OK].
4
Press [Output time] and set the one-shot output time.
5
Press [OK].
FQ2-S4 User's Manual Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
ON for 1 ms min.
ON while
measurements are
being processed
(depends on BUSY
output conditions)
Overall judgement
One-shot
output time
ON for 1 ms min.
ON while
measurements are
being processed
(depends on BUSY
output conditions)
One-shot
output delay
NG
Turns OFF.
NG
One-shot
output time
OK
289