Omron FQ2-S4 User Manual page 473

Menu command
Rotation
Angle range
Sub-pixel
Extraction con-
dition
Candidate
level
Extraction X
Extraction Y
Detection
count
Multi-point out-
put
Sorting method
Reflect
FQ2-S4 User's Manual
Description
Sets the angle range for the registered
model.
You can increase the accuracy of
measurement positioning.
Sets the detection target to only
objects with a correlation above the
specified candidate level.
Results are output only for objects with
a measured X coordinate that is within
this range.
Results are output only for objects with
a measured Y coordinate that is within
this range.
Sets the maximum number of detec-
tion results to output.
Sets whether to output only the result
with the highest correlation, or to out-
put all results that meet the specified
extraction conditions.
Sets the sort condition to use when
multiple measurement results meet
the extraction conditions.
You can specify whether to reflect the
ment results of an inspection item in
the overall judgement.
Setting range
No (default), Yes
−180 to 180
No (default), Yes
0 to 100 (default: 60)
−999,999,999.9999 to
999,999,999.9999
−999,999,999.9999 to
999,999,999.9999
1 to 32
OFF (default) or ON
Corr. ascending order, Corr. descending
order (default), Pos.X ascending order,
Pos.X descending order, Pos.Y ascend-
ing order, Pos.Y descending order
None, Yes (default)
Data Refer-
ence
Scene p. 141
Scene p. 141
Scene p. 139
Scene
Scene p. 140
Scene
Scene
Scene
Scene p. 140
Scene p. 139
Scene p. 140
471
Menu Tables