Omron FQ2-S4 User Manual page 109

11
The characters are registered for the corresponding
character type.
Error Messages during Registration
• Failed to register data. Character format is wrong.
The format or the number of characters did not match between the read character string and the registered charac-
ter string. Correct the character string to register.
• Failed to register data. Character size is too small
You can register characters that are 30 × 30 pixels or larger in the dictionary. Change the settings of the Sensor to
increase the size of the characters.
• Extraction error
The characters could not be extracted. Correct the measurement data settings or the read region.
• Excess char. num
An attempt was made to register more than 10 characters. Delete the data that does not need to be registered.
Displaying Registered Characters
1
To display the registered characters, select the char-
acters on the upper left of the display.
2
The registered characters will be displayed.
FQ2-S4 User's Manual Reading and Verifying Character Strings
107