Omron FQ2-S4 User Manual page 441

Get Image Adjustment Data: 280F 00401010
This command acquires parameters or measurement values from a position compensation item or filter item.
● Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00401010
● Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
● End Codes
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
● Parameter Descriptions
Position compensation Specifies the number of the position compensation item or filter item for which to acquire the data.
item number
External reference num- Specifies the external reference number.
ber 12-2 External Reference Parameters: p. 491
Acquired value Returns the image adjustment data or threshold value.
12-2 External Reference Parameters: p. 491
FQ2-S4 User's Manual Controlling Operation and Outputting Data with FINS/TCP No-protocol Commands
Position compensation item/filter
item number (4 bytes)
Position compensation item/filter
item number 0 to 7 (1 digit max.)
SRES Vision Sensor command code
(1 byte) (4 bytes)
00401010
External reference
number (4 bytes)
External reference
number
Acquired value (4
bytes)
Acquired value
439