Unstable Labeling Results - Omron FQ2-S4 User Manual

Item Parameter
Judgment Number of
parameters labels
Total label area Range: 0 to 999,999,999.9999
Area
Gravity center
X
Gravity center
Y
Master angle

Unstable Labeling Results

The Desired Color Cannot Be Detected
Add a specific color or enlarge the color range.
Extraction Is Automatically Performed for an Undesired Color When Teaching
Manually set the color for which to measure the labeling.
− [Inspection] −
[Inspect]
• Sensors with Color Cameras Only
1
] − [Set color] on the right of the display.
Press [
2
Drag around the color for which you want to measure
the labeling.
Labeling with that color will be automatically detected.
Continuous measurements will be performed for the im-
ages that are displayed.
Only the extracted color will appear on the display.
3
Press [OK].
4
Press [TEACH].
5
Press [Back] to end teaching.
190
Inspecting with the Labeling Inspection Item
Setting
Range: 0 to 100
Defaults: Upper limit: 100, Lower limit: 0
Defaults: Upper limit: 999,999,999.999,
Lower limit: 0
Range: 0 to 999,999,999.9999
Defaults: Upper limit: 999,999,999.999,
Lower limit: 0
Range: −99,999.999 to 99,999.999
Defaults: Upper limit: 99,999.999,
Lower limit: −99,999.999
Range: −99,999.999 to 99,999.999
Defaults: Upper limit: 99,999.999,
Lower limit: −99,999.999
Range: −180 to 180
Defaults: Upper limit: 180, Lower limit: −180
− −
[Area] [Modify]
Description
Set the upper and lower limits of the number of labels for
an OK judgement.
Set the upper and lower limits of the total label area for
an OK judgement.
Sets the upper and lower limits of the area for an OK
judgement.
Set the upper and lower limits of the gravity X for an OK
judgement.
Set the upper and lower limits of the gravity Y for an OK
judgement.
Sets the upper and lower limits of the master angle for an
OK judgement.
−
[Settings] Tab Page [Teach]
FQ2-S4 User's Manual