Selecting The Calibration Pattern To Use - Omron FQ2-S4 User Manual

(Setup Mode) − [Calibration]
1
Select the data region to set from [Calibration data 0]
to [Calibration data 31].
2
Press [Modify].
3 [ ] −
Press [Parameter] on the right of the display.
4
Set the following parameters: [Coordinate], [Origin],
and [Magnification].
5
Press [OK].
6
The calibration parameters will be displayed.
The items in the calibration parameters are the same as
those for point specification.

Selecting the Calibration Pattern to Use

In the Camera setup, select the calibration pattern to use.
Note
You can select the calibration pattern for each scene.
[Image] − [Camera setup]
1 [ ] −
Press [Select calib. data] on the right of the dis-
play.
2
Select the calibration pattern from [Calibration data 0]
to [Calibration data 31].
3
Press [Back].
Note
If the selected calibration data has not been set yet, a message will be displayed asking if you want to go to the cali-
bration setting display.
FQ2-S4 User's Manual
243
Calibration