Changing The Image Input Mode - Omron FQ2-S4 User Manual

Note
• The minimum input widths are 16 for the X axis and 8 for the Y axis.
• The values of the monitor display positions are displayed for the coordinates in the measurement results.
• The coordinate values will not change as a result of the partial input settings.
Important
If you use partial input, perform teaching again. Partial input on the X axis is supported only by the FQ2-
S4@@@@@/FQ2-S4@@@@@-M.

Changing the Image Input Mode

Pixel sampling can be applied to the input image to reduce image input time.
[Image] − [Camera setup] −
Parameter Setting
Image Input High-speed or Standard
Mode Default for FQ2-S4@@@@@/FQ2-S4@@@@@-M:
High-speed, Default for FQ2-S4@@@@@-08/FQ2-S4@-13@:
Standard
Important
If you change the image input mode, perform teaching again.
218
Shortening the Measurement Takt Time
− [Image input mode]
Description
Pixel sampling can be applied to the input image to
reduce image input time.
FQ2-S4 User's Manual