Automatic Update Parameters - AudioCodes Mediant 600 User Manual

SIP User's Manual

13.15.2 Automatic Update Parameters

The automatic update of software and configuration files parameters are described in the
table below.
Table 13-74: Automatic Update of Software and Configuration Files Parameters
Parameter
General Automatic Update Parameters
[AutoUpdateCmpFile]
[AutoUpdateFrequency]
[AutoUpdatePredefinedTime] Schedules an automatic update to a user-defined time of the day.
EMS: AUPD Verify Certificates
[AUPDVerifyCertificates]
[AUPDCheckIfIniChanged ]
[ResetNow]
Version 6.2
Enables or disables the Automatic Update mechanism for the cmp
file.

[0] = The Automatic Update mechanism doesn't apply to the cmp
file (default).

[1] = The Automatic Update mechanism includes the cmp file.
Note: For this parameter to take effect, a device reset is required.
Determines the number of minutes the device waits between
automatic updates. The default value is 0 (i.e., the update at fixed
intervals mechanism is disabled).
Note: For this parameter to take effect, a device reset is required.
The format of this parameter is: 'HH:MM', where HH depicts the
hour and MM the minutes, for example, 20:18.
Notes:

For this parameter to take effect, a device reset is required.

The actual update time is randomized by five minutes to reduce
the load on the Web servers.
Determines whether the Automatic Update mechanism verifies
server certificates when using HTTPS.

[0] = Disable (default)

[1] = Enable
Determines whether the Automatic Update mechanism performs
CRC checking to determine if the ini file has changed prior to
processing.

[0] = Do not check CRC. The ini file is loaded whenever the
server provides it. (default)

[1] = Check CRC for the entire file. Any change, including line
order, causes the ini file to be re-processed.

[2] = Check CRC for individual lines. Use this option when the
HTTP server scrambles the order of lines in the provided ini file.
Invokes an immediate device reset. This option can be used to
activate offline (i.e., not on-the-fly) parameters that are loaded using
the parameter IniFileUrl.

[0] = The immediate restart mechanism is disabled (default).

[1] = The device immediately resets after an ini file with this
parameter set to 1 is loaded.
735
13. Configuration Parameters Reference
Description
February 2011