Configuration Parameters Reference; Management Parameters; General Parameters; Web Parameters - AudioCodes Mediant 800B User Manual

User's Manual
57

Configuration Parameters Reference

The device's configuration parameters, default values, and their descriptions are
documented in this section.
Note:
parameters and their enumeration values.
57.1

Management Parameters

This section describes the device's management-related parameters.

57.1.1 General Parameters

The general management parameters are described in the table below.
Parameter
Web: Web and Telnet
Access List Table
EMS: Web Access
Addresses
[WebAccessList_x]

57.1.2 Web Parameters

The Web parameters are described in the table below.
Parameter
Web: Enable web access from all
interfaces
CLI: web-access-from-all-
interfaces
[EnableWebAccessFromAllInterfac
es]
Web: Password Change Interval
[WebUserPassChangeInterval]
Version 6.8
Parameters and values enclosed in square brackets [...] represent the ini file
Table 57-1: General Management Parameters
This table configures up to ten IP addresses that are permitted to
access the device's Web interface and Telnet interfaces. Access from
an undefined IP address is denied. When no IP addresses are defined
in this table, this security feature is inactive (i.e., the device can be
accessed from any IP address).
The default is 0.0.0.0 (i.e., the device can be accessed from any IP
address).
For example:
WebAccessList_0 = 10.13.2.66
WebAccessList_1 = 10.13.77.7
For a description of this parameter, see ''Configuring Web and Telnet
Access List'' on page 68.
Table 57-2: Web Parameters
Enables Web access from any of the device's IP network
interfaces. This feature applies to HTTP and HTTPS protocols.

[0] = (Default) Disable – Web access is only through the
OAMP interface.

[1] = Enable - Web access is through any network interface.
Defines the duration (in minutes) of the validity of Web login
passwords. When this duration expires, the password of the
Web user must be changed.
The valid value is 0 to 100000, where 0 means that the
password is always valid. The default is 1140.
57. Configuration Parameters Reference
Description
Description
783 Mediant 800B Gateway and E-SBC