Modifying The Mcu Properties - Polycom RealPresence 4000 Administrator's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
To start monitoring again, click the check box in the Monitored column in the MCUs pane, or
right-clicking the MCU icon and selecting Start Monitoring.

Modifying the MCU Properties

You can view the currently defined MCU settings, and modify them when required, for
example, change the MCU name, IP address or Secured mode.
Use this procedure to add the Username and Password to the properties of the MCU that was
automatically added to the MCU list when installing the RMX Manager. This enables
automatic login when connecting the MCU to the RMX Manager.
You can modify the MCU properties when the MCU is connected or disconnected.
To view and/or modify the MCU Properties:
1
2
3
Disconnecting an MCU
An MCU can be disconnected from the RMX Manager, without removing it from the MCUs
list.
To disconnect an MCU:
1
20-20
Use one of the following methods:
Select the MCU to disconnect and click the MCU Properties
a
Right-click the MCU icon and then click MCU Properties.
b
The MCU Properties dialog box opens.
Define/modify the required parameters. For details, see "MCU Properties" on page 13.
Click OK.
Use one of the following methods:
Select the MCU to disconnect and click the Disconnect MCU
a
button.
button.
Polycom, Inc.