Sharing Content Using Multiple Content Resolutions Mode - Polycom RealPresence 4000 Administrator's Manual

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
2
3
4
5

Sharing Content Using Multiple Content Resolutions Mode

Multiple Content Resolutions option is not supported in Ultra Secure Mode.
In Multiple Content Resolutions mode, content is shared in multiple streams, one for each
video protocol: H.263 and H.264. This allows endpoints with different protocols to connect
and disconnect without having to restart Content sharing in the middle of a conference.
Guidelines for Sharing Content using Multiple Content Resolutions
•
•
•
•
4-18
In the MCMS_PARAMETERS tab, double-click the MIN_H239_HD1080_RATE entry.
The Update Flag dialog box is displayed.
In the Value field, enter the minimum line rate at which HD1080 Resolution Content will
be enabled.
— Enter 0 to disable this flag and prevent HD Content from being used.
Click OK to confirm and exit the Update Flag dialog box.
Click Close to exit the System Flags dialog box.
Multiple Content Resolutions is supported only in:
— MPMx Card Configuration Mode.
— AVC CP conferences.
When Multiple Content Resolutions is enabled, Content is always provided to H.264 HD
endpoints. Resolutions of HD720p30 and HD1080p15 are supported.
When Multiple Content Resolutions is enabled, the Send Content to Legacy Endpoints
option is selected and can not be deselected.
Additional resources are allocated to the conference (in addition to the resources
occupied by the conference participants) for processing the content:
— Resources are allocated only when content sharing is started.
— If only HD720p30 content is provided, 1.5 HD video resources are allocated to the
conference.
Polycom, Inc.