Polycom RealPresence 4000 Administrator's Manual page 973

4
5
6
7
8
9
Polycom, Inc.
The Fast Configuration Wizard starts.
If no USB memory stick is detected and either: this is the First Time Power-up or the
Default IP Service has been deleted and the RMX has been reset, the following dialog box
is displayed:
For more information about First-time Power-up and the Fast Configuration Wizard see
the Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Getting Started
Guide, "Procedure 1: First-time Power-up" on page 2-8.
Enter the following parameters using the information supplied by your network
administrator:
— Control Unit IP Address
— Shelf Management IP Address
— Control Unit Subnet Mask
— Default Router IP Address
Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP Address.
Disconnect the LAN cable between the workstation and the LAN 2Port on the RMX's
back panel.
Connect LAN 2Port on the RMX's back panel to the local network using a LAN cable.
Enter the new Control Unit IP Address in the browser's address line, using a workstation
on the local network, and press Enter to start the RMX Web Client application.
In the RMX Web Client Login screen, enter the default Username (POLYCOM) and
Password (POLYCOM) and click the Login button.
Appendix G-Configuring Direct Connections to the Collaboration Server
G-5