Configuring The Rmx For Federated (Ice) Dialing - Polycom RealPresence 4000 Administrator's Manual

Hide thumbs Also See for RealPresence 4000:
Table of Contents

Advertisement

Configuring the RMX for Federated (ICE) Dialing

The RMX Default IP Network Service must be configured to work with the Office
Communication Server/Lync Server as the SIP Server and the RMX user defined in the
Active Directory must also be defined in the RMX ICE environment parameters to enable
remote dialing in a federated (ICE) environment, .
The procedure described here assumes that the RMX is configured to work in Microsoft environment
as described in "Configuring the Collaboration Server for Microsoft Integration" on page H-36.
To configure the RMX for ICE Dialing:
1
2
3
4
5
6
Polycom, Inc.
In the RealPresence Collaboration Server Web browser, in the RMX Management pane,
expand the Rarely Used list and click IP Network Services (
In the IP Network Services pane, double-click the Default IP Service (
entry.
The Default IP Service - Networking IP dialog box opens.
Click the SIP Servers tab.
Make sure that the SIP Server is set to Specify.
Make sure that the SIP Server Type is set to Microsoft.
Make sure that the IP address of the Office Communications Server 2007 or Lync Server
2010 is specified and the Server Domain Name is the same as defined in the OCS/Lync
Server and in the Management Network for the DNS.
Appendix H-Setting the RMX for Integration Into Microsoft Environment
).
,
, or
)
H-71

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RealPresence 4000 and is the answer not in the manual?

This manual is also suitable for:

Realpresence 1500Realpresence 2000

Table of Contents