Deleting A Flag - Polycom RealPresence 4000 Administrator's Manual

Table 22-3
Flag
SIP_TIMERS_SET_
INDEX
SIP_TO_TAG_CON
FLICT

Deleting a Flag

To delete a flag:
1
2
3
Auto Layout Configuration
The Auto Layout option lets the RMX automatically select the conference video layout based
on the number of participants currently connected to the conference. You can modify the
default selection of the conference video layout to customize it to your conferencing
preferences.
Customizing the Default Auto Layout
The default Auto Layout is controlled by 13 flags:
PREDEFINED_AUTO_LAYOUT_0, ... , PREDEFINED_AUTO_LAYOUT_12
Each of the 11 Auto Layout flags can be left at its default value, or set to any of the Possible
Values listed in Table 22-4.
The flag that controls the Auto Layout you wish to modify must be added to the System
Configuration file. For more information see "Modifying System Flags" on page 22-1.
Table 22-4
Flag Name:
n
Polycom, Inc.
Manually Added Flags - CS_MODULE_PARAMETERS Tab
Description
SIP Timer type timeout settings according to standard or proprietary
protocol.
Possible values are:
0 - Default
1 - SIP Standard recommendation.
Note: For homologation and certification testing, this flag must be set to 1.
For use in Microsoft environments.
In case of forking, a tag conflict will be resolved when Status 200 OK is
received from an answering UA.
Default: YES
In the System Flags dialog box, select the flag to delete and click the Delete Flag button.
In the confirmation message box, click Yes to confirm.
Click OK to close the System Flags dialog box.
Flags: PREDEFINED_AUTO_LAYOUT_0,...,10
PREDEFINED_AUTO_LAYOUT_
Default Value
0
CP_LAYOUT_1X1
1
CP_LAYOUT_1X1
2
CP_LAYOUT_1X1
n
(n = Number of Participants)
Possible Values
CP_LAYOUT_1X1
CP_LAYOUT_1X2
CP_LAYOUT_1X2HOR
Chapter 22-System Configuration Flags
22-45