RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
Managing system users includes:
•
•
•
•
Managing the user login process includes:
•
•
•
•
•
•
•
•
Controlling the user sessions includes:
•
•
•
Managing the System Users
When the MCU is configured to Ultra Secure Mode (the ULTRA_SECURE_MODE System
Flag is set to YES), the following user management rules are automatically enforced:
User Types
•
•
The Audit files can be retrieved by the Administrator User.
Disabling/Enabling Users
•
•
For more information see "Disabling Inactive Users" on page 23-20.
Renaming Users
•
•
Disabling Inactive Users
Users can be automatically disabled by the system when they do not log into the RMX
application for a predefined period. When the RMX is configured to Ultra Secure Mode (the
ULTRA_SECURE_MODE System Flag is set to YES), this option is enforced.
23-20
User types that are not supported when the Ultra Secure Mode
(ULTRA_SECURE_MODE=YES) is enabled.
Disabling and enabling system Users.
Renaming Users.
Disabling inactive users.
Implementing Strong Passwords.
Implementing password re-use / history rules.
Defining password aging rules.
Defining password change frequency.
Forcing password change.
Conference and Chairman Passwords.
Locking out User.
Displaying the User Login record.
Limiting the maximum number of concurrent user sessions.
User session timeout.
Limiting the maximum number of users that can connect to the system.
Auditor and chairperson user types are not supported.
The SUPPORT user type is not allowed. If it exists, this user type is removed when the
ULTRA_SECURE_MODE System Flag is set to YES and the system is restarted.
An administrator can disable a user or enable a disabled user, including administrators.
The last administrator cannot be disabled.
An administrator can rename any user, including administrators.
A renamed user is considered by the system to be a new user and is forced to change
his/her password.
Polycom, Inc.
Need help?
Do you have a question about the RealPresence 4000 and is the answer not in the manual?
Questions and answers