Polycom RealPresence 4000 Administrator's Manual page 754

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
22-24
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag
DISABLE_DUMMY_REGIST
RATION
DISABLE_GW_OVERLAY_I
NDICATION
DISABLE_SELF_NETWORK
_IND
DISABLE_WIDE_RES_TO_S
IP_DIAL_OUT
DTMF_FORWARD_ANY_DI
GIT_TIMER_SECONDS
ENABLE_1080_SVC
ENABLE_CISCO_GK
Description
Enables or disables SIP dummy registration on the domain.
Possible Values:
NO (Default) - Disables SIP dummy registration.
YES - Enables SIP dummy registration.
Note: For homologation and certification testing, the flag must
be set to YES.
When set to NO (default), displays progress indication during
the connection phase of a gateway call.
Set the value to YES to hide the connection indications
displayed on the participant's screen during the connection
phase of a gateway call.
Disable the display of the Network Quality Indicator of the
participant's own endpoint.
Default: NO
Range: YES / NO
When set to NO (default), the RMX sends wide screen
resolution to dial-out SIP endpoints. Endpoint types that do
not support wide screen resolutions are automatically
identified by the RMX according to their product type and
version and will not receive the wide resolution even if the flag
is set to YES.
When manually added and set to YES, the RMX does not
send wide screen.
Default: NO.
Used for DTMF code suppression in cascading conferences.
Determines the time period (in seconds) that MCU A will
forward DTMF inputs from conference A participants to MCU
B.
Flag range (in seconds): 0 - 360000
This flag is defined on MCU A (the calling MCU).
For more information, see"Video Layout in Cascading
conferences (CP and mixed CP and SVC)" on page 1-1.
When set to YES HD1080p30 is enabled as the highest
supported resolution in SVC mode.
Range: YES / NO
Default: NO
When set to YES, it enables the use of an identical prefix for
different RMXs when registering with a Cisco MCM
Gatekeeper.
Default: NO.
Polycom, Inc.