RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
IOS Gatekeeper
>> Set up zones and gateway type prefixes to enable dialing to DMA and RMX systems.
IOS and CMA Gatekeepers (Neighbored)
>> Configure the Cisco IOS Gatekeeper for two separate zones.
Polycom Equipment
The following table lists the Polycom products supported within the various Deployment
Architecture.
Only RMX configurations are described in detail in this document.
Configuration procedures for all other solution components are described in the Polycom
Unified Communications Deployment Guide for Cisco Environments.
Table I-5
Polycom TIP and SIP
Polycom DMA 7000 system
Polycom RealPresence Collaboration Server
(RMX) 2000 and RealPresence Collaboration Server
(RMX) 4000 systems
Immersive Telepresence Systems:
•
•
•
•
HDX Systems:
•
•
•
•
I-16
a
With Neighbored IOS and CMA Gatekeepers
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, "Configuring Cisco Unified Communications Manager for H.323".
b
With CMA Gatekeeper
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, "Configuring Cisco Unified Communications Manager for H.323".
c
With IOS Gatekeeper
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, "Configuring Cisco Unified Communications Manager for H.323".
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, "Configuring the Cisco IOS Gatekeeper ".
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, "Configure the Cisco IOS Gatekeeper for use with a CMA System".
Supported current Polycom products
RPX 200 and 400 systems
OTX 300 system
TPX HD 306 system
ATX HD 300 system
7000 HD Rev C
8000 HD Rev B
9006
4500
Version(s)
V4.0
V7.6 and higher
MPMx card is required.
V3.0.3
Requires TIP option key.
Requires Polycom Touch Control.
V3.0.3
Requires TIP option key.
Polycom, Inc.
Need help?
Do you have a question about the RealPresence 4000 and is the answer not in the manual?